PU plotter cut heat seal material with adhesive polyester backing for low temperature and time of transfer. The material is thin, elastic, soft to the hand and blends well into the textiles. Specifically conceived for polyester based “technical” fabrics eventually mixed with an addition of cotton and elastic fibres. Low temperature application prevents undesirable effects such as glossiness, fibre damaging and decrease or loss of some of the specific features of the textile.
Suitable for cotton, polyester and poly/cotton blends (not suited for treated and dye sublimated textiles), performance wear, elastan
• Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 248°F/120°C • Use medium pressure for 5 seconds • Peel carrier Hot/Cold
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Wait at least 24 hours from application before washing. Washing resistance up to 80°C, best inside-out. Do not use bleach or other aggressive chemical agents. Not suitable for dry cleaning Suitable for tumble dry, cotton cycle
The product is REACH compliant The product is certified Öko-Tex® Standard 100 Class I